Hello there! This weekend flew by! As I mentioned in Friday’s post I spent some time at my niece’s house starting a kitchen makeover. I can’t wait to share what we are doing over there, so stay tuned. Before I started that, I made a few small updates in my family room and I have some DIY wall art ideas to share.
I was never 100% happy with my wall decor over the sofa in this space. It was cute, but it felt disconnected as a whole with the large-sized map print to the left of this area. I loved the framed burlap I originally put on the wall several years ago (shown below), so I wanted to expand on that.
The first burlap sack I had picked up at a flea market. When I saw it that day I immediately thought it would make for cool wall decor. Recently, I saw another that I liked on eBay, in a similar size so I ordered that. I didn’t have another white frame in the same size so I picked up two more of these Studio Decor frames from Michael’s. You may remember I used these same exact frames in my bedroom. I like the weathered wood finish on them and the 18 X 24 size is my favorite. The most important reason I chose this frame is because it’s plexiglass, rather than regular glass. Burlap is thick, and it’s a little tight getting into the frames. Plexiglass has a little give to it, I would be afraid real glass would crack or shatter.
What You Will Need*:
To begin, first cut the back off of the sack so it’s not so bulky. Then trim it down to size, leaving about an extra inch all around. You want to have some overhang.
Center the sack on the backing and tape down the overhang with your painters tape to keep it in place.
Once you’ve done that, pop it into the frame but don’t lock it in just yet. This is the part where it’s a little snug, so you’ll have to use some force. This is why you DO NOT want to use a glass frame. Once it’s in place you may have a wrinkle or two, which is why you want to leave some overhang. Before you lock everything into place, you can tug on the overhang to smooth any wrinkles, or slide it over a bit if it becomes off-center.
Because I hung my frames at about the same height as my giant wall map, and because my couch has a low back, that left a bit of empty wall space between the sofa and the burlap frames. I placed a leftover piece of wood from my latest Shiplap project on the back of the sofa and arranged some decor on it to get a feel of how it would look. I like how it fills in the void. I had thought about adding a sofa table there, but the room is a bit narrow and I don’t want to take up any additional space. I plan on adding a shelf there instead. This arrangement shown is just temporary, to see how it would look.
I also added two rustic keys to the wall to balance things out. We have that weird soffit dividing the room which was an additional challenge in getting the wall decor right in here. Now I feel it has a better overall flow to it.
The plexiglass is reflective so it was hard to get a really clear photo of the burlap, but you get the idea! Now I need to get moving on the opposing wall which has been empty since we turned this room (which used to be my one car garage!) into the family room.
Now I’m ready to take down all of my fall decor and get working on Christmas. What do you think, too soon?
*This post contains affiliate links, you can read my full disclosure here.
Linking up with Between Naps on the Porch.
(adsbygoogle = window.adsbygoogle || []).push({});